Troubleshooting Shark Vacuum Nv360: When Your Machine Doesn’t Work Properly
Lots of people who love vacuum cleaners may have a machine from Shark, one of the biggest brand names in the world, at home. Among thousands of models introduced to the market, Shark navigator lift-away deluxe nv360 upright vacuum is one of the top-buy products because of its good price and performance. However, after a period of time using 
Shark Vacuum NV360, users may find that it vacuums less, or even no dirt while operating. In this post, we will learn several reasons why the vacuum fails to suck up dust and how to correct them.
DIRTY FILTERS
The HEPA filter provided needs cleaning every two years and other filters require 2 to 3 months. If the suction power is insufficient, one of the filters, or all of them, is seriously dirty. To clean them, tap to get rid of most of the dirt, then use pure warm water for cleaning the remaining. If this action cannot improve the situation, get new filters.
FULLY FILLED CANISTER
When the canister is full, there is no more space for vacuuming dirt. For Shark Navigator Lift-Away Deluxe NV360 
, it is easy to recognize when the dust cup is full as its body is made of transparent plastic. Just extract the cup from the machine, move it above the trash bin then press the tab to open the bottom, all the dust and debris will fall into the bin. This action may make you catch dirt, so be careful.
STUCK OBJECTS
There are two positions that objects are usually stuck in: the dusting brush and the hose. This makes the dirt cannot get through and decreases the efficiency of the vacuuming. First, check the brush of the upright vacuum. This part is located at the bottom of the machine, so just lie it down on the floor and look so that you will know if anything is stuck in the brush, then take it out. If not, check the hose. To remove an object from the hose, push and pull the latches on the two sides of the hose, it may fall out immediately.
BROKEN HOSE
If your Shark 360 vacuum fails to suck the dirt and there is some strange sound from the hose, it may be broken. This is because, after a long time of use, some pieces of objects hit the nozzle many times and caused small holes in it. To locate the hole, listen carefully to the sound and use your hand to identify where the air comes out. If you find it, use the tape to heal. Otherwise, the connection may be loose, just check and tighten it until there is no sound.
BRUSH PROBLEMS
There are several troubles involving the brush when Shark navigator lift away nv360 doesn’t work properly.
First, something gets stuck in it. Follow the instructions above to take it out.
Second, the brush engine, which is separate from the main unit, stops working. In this case, you should bring it to Shark customer service for maintenance, or replace it with a new one if needed.
Moreover, check the power button if it is in the II position, which operates the brush, or not.
WRONG MODE USED
Some people may not be aware of which mode the machine is set, floor cleaning or carpet vacuuming. If Shark vacuum nv360 doesn’t run in the right mode, the suction may be lower and the efficiency may decrease.
CONCLUSION
It is very helpful for users to know how to troubleshoot and correct the problems encountered with their 
Shark Navigator NV360 reviews. That may save them lots of time and money for maintenance in the store.